In combination with the CUMPAN Cockpit Assistant, this additional module allows a gear indicator to be retrofitted to the following KTM LC4 and LC8 models:
- KTM LC4 models from 2007–2013: 690 Duke | 690 Enduro (R) | 690 Rally | 690 SMC (R)
- KTM LC8 models from 2003–2013: 950 Adventure (S) | 950 Super Enduro (R) | 950 Super Moto (R) | 990 Adventure (R) | 990 Super Duke (R) | 990 Super Moto (R/T) | 1190 RC8 (R)
The expansion package includes a gear sensor that can detect all positions of the shift drum and converts them into an electronic signal. The CUMPAN cockpit assistant can interpret and display this signal via its analog inputs. The gear is not calculated from speed and RPM but is determined directly from the mechanical position of the shift drum, which eliminates incorrect gear display. Installation replaces the original gear sensor and reuses the existing 3-pin connector.
Note
The original gear sensor detects neutral as well as the 2nd and 3rd gear positions. The ECU uses the information about 2nd and 3rd gear to reduce power under full load, which is necessary to meet emission regulations.
The BEROTEC gear sensor only forwards the neutral signal to the ECU, which prevents this power limitation. Therefore, its use is permitted for **track use only**.
Compatibility
- ✓ KTM LC4 models from 2007–2013: 690 Duke | 690 Enduro (R) | 690 Rally | 690 SMC (R)
- ✓ KTM LC8 models from 2003–2013: 950 Adventure (S) | 950 Super Enduro (R) | 950 Super Moto (R) | 990 Adventure (R) | 990 Super Duke (R) | 990 Super Moto (R/T) | 1190 RC8 (R)
Please check compatibility based on year of manufacture and part number:
- KTM part number: 60011023100 or 60011023000
Detailed installation documentation for KTM 990 can be found here.
Scope of delivery
- Gear sensor with connector electronics
- O-ring
- Presslok™ single-wire connector with gel filling
- ACC splitter
antonse –
Super Teil. Verbaut an einer LC 8. Einfache Montage. Top Verarbeitung.