This expansion pack enables the acquisition of the actual oil pressure and the display of the acquired measured values with the CUMPAN Cockpit Assistant. By using an adapter, the original oil pressure switch and the corresponding oil pressure signal are retained. This means that there is no interference with the vehicle’s sensors and the manufacturer’s warranty remains intact.

► An oil pressure switch only warns when a limit value is undershot (the oil pressure switch installed by KTM at the factory has a warning range below 0.13-0.3 bar).

► The BEROTEC oil pressure sensor measures the actual oil pressure in a range of 0-10 bar. A warning threshold can be adjusted at the user’s discretion; if it is not reached, the oil pressure is displayed in red.

Advantages

• Oil pressure of cold or hot oil can be monitored
• Oil deficiency can be detected by pressure drop
• Monitoring: Oil pressure can drop during longer rides on the rear wheel
• Wear detection: oil dilution due to gasoline can result in a reduction of the oil pressure
• Early detection of engine problems

Scope of delivery

• Oil pressure sensor
• Connection electronics oil pressure sensor
• Presslok™ single-wire connector with gel filling
• ACC splitter
• Special oil filter cover with M10x1 threaded connection for oil pressure sensor and temperature sensor
• O-ring for oil filter cover

Compatibility

• ✓ suitable for Sportenduros with 250-500ccm³
• ✘ Not suitable for Sportenduros 250/350cc³ model year 2017-2023
• ✘ Not suitable for Sportenduros 450/500cc³ model year 2024-

Video