The CUMPAN Cockpit Assistant is a versatile display instrument that provides meaningful information for the driver in its compact design.
- RPM
- Engine temperature
- Gear signal (depending on model)
- Ambient temperature
- Oil pressure
- LAMBDA/AFR
- Additional engine temperatures
- 12V Voltage Display
With the help of this information, the driver can utilize the full performance potential of his engine while avoiding damaging loads. The CUMPAN monitors the correct shift point via engine speed / engine temperature and warns if necessary with the integrated shift light. In addition, the currently selected gear and the ambient temperature are displayed.
Other features
- adjustable shift light – Visual warning when exceeding the maximum allowable temperature of the engine to prevent engine damage
- at low ambient temperature the system warns of possible icy conditions
- Free adjustment of RPM and temperature limits in the software
- Settings and operation of the CUMPAN are made via the touch display
- 6 different display layouts available
- The display can be shown in 16 different colors
Technical data
- Supply voltage: 9-15VDC
- Power consumption (average): 60mA
- Display resolution: 160 x 128px
- Screen diagonal: 1.8″
- Weather resistance: IP67
- Dimensions (L x W x H) [mm]: 54.4 x 38.9 x 13.1
Compatibility
- ✓ KTM 690 | SMC-R + Enduro | EU+US models | Euro3* (from 2007) / Euro4 / Euro5
- ✓ KTM 1050 | Adventure
- ✓ KTM 1190 | Adventure | RC8 (R)
- ✓ HUSQVARNA 701 | Supermoto + Enduro | EU+US models | Euro3 (from 2015) / Euro4 / Euro5
- ✓ GasGas 700 | ES + SM (from 2022)
* Note: For a complete Gear indicator on the KTM 690 models from 2007-2013, the Add-on Gear indicator is required.
Scope of delivery
- CUMPAN Cockpit Assistant incl. Connection cable
- Engine temperature sensor M10x1
- RPM signal tap
- Branch connector for the gear signal
- Cable tie and 3M VHB adhesive pad
► Display mount not included
Change history
November 2023
- Service menu integrated
- Wear rating via:
- Engine cycle counter (counting the actual crankshaft revolutions)
- Operating hours counter
- Cold start counter
- Display of the average engine speed
- Adjustable thresholds for service intervals with warning light
May 2023
- Extended by another (second) multifunctional analog input for displaying gear, temperature, oil pressure, lambda, AFR
- Display of up to three engine temperatures (e.g. oil and cooling water)
- Compatibility with the most common Lambda controllers
- Temperature sensor calibration
- Visual warning when oil pressure drops
- Performance enhanced GUI and measurement frequency
- Clearer menu structure
- New and improved layouts and colors
- New Add-ons available
February 2021
- Extended by an analog input for additional use as a gear indicator
- 6 new selectable display layouts
- Display speed increased
- model-specific variants added
February 2020
- Sales launch CUMPAN
kenneth mortensen (verified owner) –
What a cool little device for my 701 sm.Easy to install due to the many videos available.The hardest part was hiding the wires.The gear calibrate was very easy,just follow directions and you will be fine.Good customer support also.The order took exactly three weeks to be delivered from Germany to Long Beach, California.Not too bad.Thanks to all at Berotec for a good buying experience.
andrej.mochov (verified owner) –
I bought this device for 2020 KTM 690. Long story short, I’m very happy with the device. It’s actually plug-and-play. All works fine.
The only thing I would point out, is that you need to check both videos in “Installation help”, as only the second video shows how to connect gear indicator. Also, important that you calibrate the gear indicator – it’s simple and very obvious.
So all in all, excellent product
BEROTEC GmbH –
Hi Andrej and thanks for the review and your suggest!
We are happy to hear that and are planning to do an new video wich contains all installation steps.
Thanks again👍
Zacharias Lionakis –
I bought it for my 690 Enduro R 2020, works very nicely and is very compact. Only issue was in direct sunlight but other than that it’s great. Now on the downside it’s not really waterproof, my cumpan absorbed water (most probably through the cable feed) and info on the screen are not visible anymore …need to remove it Could be a better option if used for road applications
BEROTEC GmbH –
Hello Mr.Lionakis, thank you for your feedback. The CUMPAN is IP67 waterproof. If you are having issues, feel free to write us an email. Be aware that there can occure problems when power washing the bike and high pressure is used. Best regards!
RT. Beemer –
Very happy with the Cumpan kit. KTM should reconsider installing a full display like on the older 690’s. The current display is not fit for such an expensive allroad. This Cumpan kit is the best solution untill that time! It works fine, does what it promises and is easy to install and program. In pure sunlight it get harder to read but so does the KTM display for a lot of more money. Luckely Boretec created the Cumpan after KTM didn’t do the newer model 690 justice by given it a minimalistic enduro display.
Bobby –
Nice and small, easy to install, surprisingly easy-to-read display, this is one of the best aftermarket add-ons for the 690/ 701. The OEM dash has no tacho or temperature gauges and this fixes that instantly. Great design, well done.
Bryson –
Great upgrate product for my 701LR – very clear and easy to follow instructions, no dramas fitting the unit. Display is cristal clear, always find RPM and gear position usfull, engine and ambient temp a great added measurement. If you like a bit more data on these bikes this product is a well worth adding.
Steve McMahon –
Ordered this for my 18 701 enduro. Deliver to the US was quick and the packaging and instructions were good. I really value knowing what gear and RPM as I have a Rekluse clutch and the feedback is helpful. I thought the display was a bit too small at first but its fine. Super impressed.
george semlanoi –
Excellent product for my 2020 Ktm 690 enduro. Now i have rpm, temp and gear display. Very good quality and easy to install.